Enershield Thermalshield Air Barrier

With the cost of energy continuing to rise, heating and cooling bills for your building are a major expense. For businesses that keep their doors open to offer an open and inviting business for passing foot traffic (potential customers), these costs are even greater.

Features

The Thermalshield Air Barrier takes the same energy efficient technology that Enershield has been producing for years and turns it up a notch, literally. The Thermalshield is an electrically heated Air Barrier that will help to provide additional heat and comfort to areas of concern while continuing to seal off the open or exposed area.

There are varying Air Barrier concepts on the market claiming to be equal to the Enershield design criteria, but when comparing feature to feature they fall well short of anything that Enershield manufactures.

Model TS-24

Features: Top electrical tie in, full length articulating discharge nozzle

Includes: 1 Rear wall mount bracket, wireless remote control 2 AAA batteries

Motors: 1 @ 30 W, 120V/1/60, 2 Speed, TEAO, double shafted, capacitor start, internally protected self re-setting

Heat Coil: 3 Kw PTC Coil with self re-setting high limit switch, 220V/3/60, 3 minute cool down period, finger safe heat coil protection.

Construction: Main body is 18 Gauge formed steel powder coated white, with black plastic decorative end caps, front face is molded aluminum, with chromed bar style front intake grille

Fans: 2 @ 4.5" diameter Plastic Tangential Blower Wheels

Installation Height: Minimum 1ft. Maximum 8ft. (based on balanced air system)

Electrical: 220V/3/60, neutral required, each unit is to be permanently wired

FLA: 8.3 @ 208V 3 phase / 8.6 @ 220V 3 phase

Average dB: Sound level 10 ft in front of the unit in free field is an average of 55-53 dB

Approx. Weight: 33 lbs/ 15 Kg

Optional Controls: Hand/Off/Auto keyed switch, Automatic Activation with up to 15s off delay, (remote capability is lost with optional keyed switch).

Model TS-36

Features: 3 minute cool down period, top electrical tie in, finger safe heat coil protection, full length articulating discharge nozzle

Includes: 1 Rear wall mount bracket, wireless remote control 2 AAA batteries

Motors: 1 @ 60 W, 120V/1/60, 2 Speed, TEAO, double shafted, capacitor start, internally protected self re-setting

Heat Coil: 6 Kw PTC Coil with self re-setting high limit switch, 220V/3/60

Construction: Main body is 18 Gauge formed steel, with black plastic decorative end caps, front face is molded aluminum, with chromed bar style front intake grille

Fans: 2 @ 4.5" diameter Plastic Tangential Blower Wheels

Installation Height: Minimum 1ft. Maximum 8ft. (based on balanced air system). Unit is to be placed a min of 1" above the door header

Electrical: 220V/3/60, neutral required, each unit is to be hard wired

FLA: 17.1 @ 208V 3 phase / 16.5 @ 220V 3 phase

Average dB: Sound level 10 ft in front of the unit in free field is an average of 57-55 dB

Approx. Weight: 37.4 lbs/ 17 Kg

Model TS-48

Features: 3 minute cool down period, top electrical tie in, finger safe heat coil protection, full length articulating discharge nozzle

Includes: 1 Rear wall mount bracket, wireless remote control 2 AAA batteries

Motors: 1 @ 60 W, 120V/1/60, 2 Speed, TEAO, double shafted, capacitor start, internally protected self re-setting

Heat Coil: 8 Kw PTC Coil with self re-setting high limit switch, 220V/3/60

Construction: Main body is 18 Gauge formed steel, with black plastic decorative end caps, front face is molded aluminum, with chromed bar style front intake grille

Fans: 2 @ 4.5" diameter Plastic Tangential Blower Wheels

Installation Height: Minimum 1ft. Maximum 8ft. (based on balanced air system)

Electrical: 220V/3/60, neutral required, each unit is to be hard wired

FLA: 23.6 @ 208V 3 phase / 21.8 @ 220V 3 phase

Average dB: Sound level 10 ft in front of the unit in free field is an average of 58-56 dB

Approx. Weight: 40 lbs/ 18 Kg

Model TS-72

Features: 3 minute cool down period, top electrical tie in, finger safe heat coil protection, full length articulating discharge nozzle

Includes: 2 Rear wall mount brackets, wireless remote control 2 AAA batteries

Motors: 2 @ 60W, 120V/1/60, 2 Speed, TEAO, double shafted, capacitor start, internally protected self re-setting

Heat Coil: 12 Kw PTC Coil with self re-setting high limit switch, 220V/3/60

Construction: Main body is 18 Gauge formed steel, with black plastic decorative end caps, front face is molded aluminum, with chromed bar style front intake grille

Fans: 4 @ 4.5" diameter Plastic Tangential Blower Wheels

Installation Height: Minimum 1ft. Maximum 8ft. (based on balanced air system)

Electrical: 220V/3/60, neutral required, each unit is to be hard wired

FLA: 34.2 @ 208V 3 phase/ 32.3 @ 220V 3 Phase

Average dB: Sound level 10 ft in front of the unit in free field is an average of 60-58 dB

Approx. Weight: 60 lbs/ 27 Kg

Applications

  • Open doorways where additional heat needs to be provided

Options

Model TS-24

  • 18 Gauge Formed Steel Powder Coated White

Options

Model TS-36

  • 18 Gauge Formed Steel

Options

Model TS-48

  • 18 Gauge Formed Steel

Options

Model TS-72

  • 18 Gauge Formed Steel