Enershield Xtremeshield Air Barrier

Xtremeshield (XS) Air Barriers are designed for doors that are between 18’ to 26’ feet in height. Xtremeshield models are constructed from a welded powder coated frame and are insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, powder coated telescopic installation sliders and include powder coated wall brackets as well as an articulating discharge nozzle. All models also include an Automatic Activation Package so the Air Barrier operates in conjunction with the doors operation.

Features

Xtremeshield models include a Control Panel. Motors are mounted externally to maintain consistent and equal fan placement across the entire width of the Air Barrier (every 2.5"). Xtremeshield Air Barriers are ideal for large Shipping/Receiving, Manufacturing or Transportation applications. We would be glad to supply you with an Energy Loss Calculation (using an ASHRAE formula) to show you what you are losing in energy as well as what we can save you in energy based on the amount of time the door is opened. Contact us for additional information regarding this model.

Model XS-120

Enershield Xtremeshield Air Barrier: 7500 fpm, (cfm and number of motors see above chart)

Motors: 15, 20 or 25 hp 1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible Construction: powder coated steel frame construction, galvanized exterior sheet metal.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” bore c/w matched blower housing, 12 5/8” diameter. Fan wheel every 2 ½’.

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, powder coated telescopic installation sliders, c/w powder coated wall brackets,1 3/16” 1045 drive shaft precision ground steel, sealed and pre-greased pillow block ball bearings at drive end then every 2 1/2’ along shaft length. Nozzle shall extend the full length of the unit and be equipped with 14 gauge steel powder coated Louvre adjustable +/- 20 degrees.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection.

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation.

Note: Model number indicates cabinet length in inches. Ex. XS-192 = 192 inch cabinet length.

Average decibel rating at a distance of 10’ from the unit is 79 dB. Weight of XS models is 95 lb per linear foot.

Model XS-150

Max Velocity @ Nozzle 7500 fpm/36,750cfm-Required velocity @ 2’ from floor, 900-1100 fpm

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, telescopic installation sliders that extend up to 9”, 3/16” angle iron wall brackets, 6” full length articulating discharge nozzle adjustable +/- 20 degrees, diffuser is of welded 14 gauge mild steel. Full length 1 3/16” 1045 drive shaft, precision ground steel, with sealed and pre-greased, serviceable pillow block ball bearings at drive end, then every 30” along shaft length. Shaft is driven by a 3B belt drive. All accessory components are powder coated ASA 49. The Air Barrier is standard top air intake. Front intake available upon request. The Air Barrier comes fully assembled.

Controls: Remote mounted, lockable NEMA 1 Soft Start Control Panel, 0-7 sec ramp with NEMA 4X photo electric micro switch for automatic activation with door opening and closing. Sensor has a 10m sensing range, and programmable 15 sec off delay. Control panel is equipped with ON/OFF keyed switch, motor overload protection, external overload reset, 120V control circuit.

Motor(s): Premium efficiency, 1 @ 20 hp 1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, Double Lip Seal, 1.15 SF, VFD Compatible, Ball Bearings with Exxon Polyrex EM grease, Continuous Duty, NEMA Design B T-256 Frame with double bolt slide base. Suitable for Class 1, Div 2/Zone 2 Group A, B, C & D, T2D.

Construction: Welded 1/8” angle iron frame, clad with 20 gauge G.90 galvanized sheet metal fastened with self drilling screws and siliconed to the base frame. Frame is powder coated ASA 49.

Fans: 5 galvanized double inlet forward curved blowers, wheels provided with welded 1 3/16” double set screw hubs c/w matched blower housing, 12 7/8” inch diameter. Fans are spaced every 2 1/2’ – 10’w = 4 fans. AMCA Class II Capable. Max Wheel RPM-2140.

Installation Height: Minimum 18’ft. Maximum 26’ft. (based on balanced air system)

Available Voltage: 208-230 / 460 / 575, 3 Phase, 60Hz.

FLA: 52 - 47 / 23.5 / 18.8

Average dB: Sound level 10 ft in front of the unit in free field is an average of 77-80 dB

Approx. Weight: 1,188 lbs/ 540 Kg

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation. CWB Certified.

Model XS-180

7500 fpm/35,760cfm

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, telescopic installation sliders that extend up to 9”, 3/16” angle iron wall brackets, 6” full length articulating discharge nozzle adjustable +/- 20 degrees, diffuser is of welded 14 gauge mild steel, 1 3/16” 1045 drive shaft precision ground steel sealed and pre-greased pillow block ball bearings at drive end, then every 2’ along shaft length. All components are and powder coated ASA 49. The Air Barrier is standard top air intake. Front intake available upon request.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection.

Motors: 2 @ 15 hp1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible, Ball Bearing, Continuous Duty, T-254 Frame w double bolt slide base.

Construction: Welded 1/8” angle iron frame, clad with 20 gauge G.90 galvanized sheet metal fastened with self drilling screws and siliconed to the base frame. Frame is powder coated ASA 49.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” inch bore c/w matched blower housing, 12 7/8” inch diameter. Fan wheels every 2 1/2’ – 10’w = 4 fans.

Installation Height: Minimum 18’ft. Maximum 26’ft. (based on balanced air system)

Available Voltage: 208 / 230 / 460 / 575, 3 Phase. 60Hz.

FLA: 38.7/36/18/14

Average dB: Sound level 10 ft in front of the unit in free field is an average of 77-80 dB

Approx. Weight: 1425 lbs / 648 Kg

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation. CWB Certified

Model XS-210

7500 fpm/41,720cfm

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, telescopic installation sliders that extend up to 9”, 3/16” angle iron wall brackets, 6” full length articulating discharge nozzle adjustable +/- 20 degrees, diffuser is of welded 14 gauge mild steel, 1 3/16” 1045 drive shaft precision ground steel sealed and pre-greased pillow block ball bearings at drive end, then every 2’ along shaft length. All components are and powder coated ASA 49. The Air Barrier is standard top air intake. Front intake available upon request.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection.

Motors: 2 @ 15 hp1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible, Ball Bearing, Continuous Duty, T-254 Frame w double bolt slide base.

Construction: Welded 1/8” angle iron frame, clad with 20 gauge G.90 galvanized sheet metal fastened with self drilling screws and siliconed to the base frame. Frame is powder coated ASA 49.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” inch bore c/w matched blower housing, 12 7/8” inch diameter. Fan wheels every 2 1/2’ – 10’w = 4 fans.

Installation Height: Minimum 18’ft. Maximum 26’ft. (based on balanced air system)

Available Voltage: 208 / 230 / 460 / 575, 3 Phase. 60Hz.

FLA: 38.7/36/18/14

Average dB: Sound level 10 ft in front of the unit in free field is an average of 77-80 dB

Approx. Weight: 1,663 lbs / 756 Kg

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation. CWB Certified

Model XS-240

7500 fpm/47,680cfm

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, telescopic installation sliders that extend up to 9”, 3/16” angle iron wall brackets, 6” full length articulating discharge nozzle adjustable +/- 20 degrees, diffuser is of welded 14 gauge mild steel, 1 3/16” 1045 drive shaft precision ground steel sealed and pre-greased pillow block ball bearings at drive end, then every 2’ along shaft length. All components are and powder coated ASA 49. The Air Barrier is standard top air intake. Front intake available upon request.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection.

Motors: 2 @ 15 hp1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible, Ball Bearing, Continuous Duty, T-254 Frame w double bolt slide base.

Construction: Welded 1/8” angle iron frame, clad with 20 gauge G.90 galvanized sheet metal fastened with self drilling screws and siliconed to the base frame. Frame is powder coated ASA 49.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” inch bore c/w matched blower housing, 12 7/8” inch diameter. Fan wheels every 2 1/2’ – 10’w = 4 fans.

Installation Height: Minimum 18’ft. Maximum 26’ft. (based on balanced air system)

Available Voltage: 208 / 230 / 460 / 575, 3 Phase. 60Hz.

FLA: 38.7/36/18/14

Average dB: Sound level 10 ft in front of the unit in free field is an average of 77-80 dB

Approx. Weight: 1900 lbs / 863 Kg

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation. CWB Certified

Model XS-270

7500 fpm/53,600cfm

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, telescopic installation sliders that extend up to 9”, 3/16” angle iron wall brackets, 6” full length articulating discharge nozzle adjustable +/- 20 degrees, diffuser is of welded 14 gauge mild steel, 1 3/16” 1045 drive shaft precision ground steel sealed and pre-greased pillow block ball bearings at drive end, then every 2’ along shaft length. All components are and powder coated ASA 49. The Air Barrier is standard top air intake. Front intake available upon request.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection

Motors: 2 @ 20 hp 1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible, Ball Bearing, Continuous Duty, T-256 Frame w double bolt slide base.

Construction: Welded 1/8” angle iron frame, clad with 20 gauge G.90 galvanized sheet metal fastened with self drilling screws and siliconed to the base frame. Frame is powder coated ASA 49.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” inch bore c/w matched blower housing, 12 7/8” inch diameter. Fan wheels every 2 1/2’ – 10’w = 4 fans.

Installation Height: Minimum 18’ft. Maximum 26’ft. (based on balanced air system)

Available Voltage: 208 / 230 / 460 / 575, 3 Phase. 60Hz.

FLA: 52 / 47 / 24 / 18.8

Average dB: Sound level 10 ft in front of the unit in free field is an average of 77-80 dB

Approx. Weight: 2000 lbs/ 910 Kg

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation. CWB Certified

Model XS-300

7500 fpm/59,600cfm

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, telescopic installation sliders that extend up to 9”, 3/16” angle iron wall brackets, 6” full length articulating discharge nozzle adjustable +/- 20 degrees, diffuser is of welded 14 gauge mild steel, 1 3/16” 1045 drive shaft precision ground steel sealed and pre-greased pillow block ball bearings at drive end, then every 2’ along shaft length. All components are and powder coated ASA 49. The Air Barrier is standard top air intake. Front intake available upon request.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection.

Motors: 2 @ 20 hp 1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible, Ball Bearing, Continuous Duty, T-256 Frame w double bolt slide base.

Construction: Welded 1/8” angle iron frame, clad with 20 gauge G.90 galvanized sheet metal fastened with self drilling screws and siliconed to the base frame. Frame is powder coated ASA 49.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” inch bore c/w matched blower housing, 12 7/8” inch diameter. Fan wheels every 2 1/2’ – 10’w = 4 fans.

Installation Height: Minimum 18’ft. Maximum 26’ft. (based on balanced air system)

Available Voltage: 208 / 230 / 460 / 575, 3 Phase. 60Hz.

FLA: 52 / 47 / 24 / 18.8 Average dB: Sound level 10 ft in front of the unit in free field is an average of 77-80 dB

Approx. Weight: 2,375 lbs/ 1,080 Kg

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation. CWB Certified

Model XS-330

7500 fpm/65,560cfm

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, telescopic installation sliders that extend up to 9”, 3/16” angle iron wall brackets, 6” full length articulating discharge nozzle adjustable +/- 20 degrees, diffuser is of welded 14 gauge mild steel, 1 3/16” 1045 drive shaft precision ground steel sealed and pre-greased pillow block ball bearings at drive end, then every 2’ along shaft length. All components are and powder coated ASA 49. The Air Barrier is standard top air intake. Front intake available upon request.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection.

Motor: hp1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible, Ball Bearing, Continuous Duty, T-254 Frame w double bolt slide base.

Construction: Welded 1/8” angle iron frame, clad with 20 gauge G.90 galvanized sheet metal fastened with self drilling screws and siliconed to the base frame. Frame is powder coated ASA 49.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” inch bore c/w matched blower housing, 12 7/8” inch diameter. Fan wheels every 2 1/2’ – 10’w = 4 fans.

Installation Height: Minimum 18’ft. Maximum 26’ft. (based on balanced air system)

Available Voltage: 208 / 230 / 460 / 575, 3 Phase. 60Hz.

FLA: 38.7/36/18/14

Average dB: Sound level 10 ft in front of the unit in free field is an average of 77-80 dB

Approx. Weight: 2,613 lbs / 1,188 Kg

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation. CWB Certified

Model XS-360

7500 fpm/71,520cfm

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, telescopic installation sliders that extend up to 9”, 3/16” angle iron wall brackets, 6” full length articulating discharge nozzle adjustable +/- 20 degrees, diffuser is of welded 14 gauge mild steel, 1 3/16” 1045 drive shaft precision ground steel sealed and pre-greased pillow block ball bearings at drive end, then every 2’ along shaft length. All components are and powder coated ASA 49. The Air Barrier is standard top air intake. Front intake available upon request.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection.

Motor: hp1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible, Ball Bearing, Continuous Duty, T-254 Frame w double bolt slide base.

Construction: Welded 1/8” angle iron frame, clad with 20 gauge G.90 galvanized sheet metal fastened with self drilling screws and siliconed to the base frame. Frame is powder coated ASA 49.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” inch bore c/w matched blower housing, 12 7/8” inch diameter. Fan wheels every 2 1/2’ – 10’w = 4 fans.

Installation Height: Minimum 18’ft. Maximum 26’ft. (based on balanced air system)

Available Voltage: 208 / 230 / 460 / 575, 3 Phase. 60Hz.

FLA: 38.7/36/18/14

Average dB: Sound level 10 ft in front of the unit in free field is an average of 77-80 dB

Approx. Weight: 2,850 lbs / 1,296 Kg

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation. CWB Certified

Model XS-390

Enershield Xtremeshield Air Barrier:7500 fpm, (cfm and number of motors see above chart)

Motors: 15, 20 or 25 hp 1800 RPM TEFC/belt drive/cast iron motors @ selected voltage, 3ph, IP55, VFD Compatible

Construction: powder coated steel frame construction, galvanized exterior sheet metal.

Fans: Galvanized double inlet forward curved blower wheel with 1 3/16” bore c/w matched blower housing, 12 5/8” diameter. Fan wheel every 2 ½’.

Features: Cabinet insulated with sound absorbing fiberglass insulation with an acrylic anti-microbial coating, powder coated telescopic installation sliders, c/w powder coated wall brackets,1 3/16” 1045 drive shaft precision ground steel, sealed and pre-greased pillow block ball bearings at drive end then every 2 1/2’ along shaft length. Nozzle shall extend the full length of the unit and be equipped with 14 gauge steel powder coated Louvre adjustable +/- 20 degrees.

Includes: Lockable NEMA 1 Soft Start Control Panel 0-7 sec ramp with photo electric micro switch for automatic activation with door opening and closing. ON/OFF keyed switch, programmable 15 sec off delay, individual motor overload protection.

Certification: Units are to be manufactured and certified by a CSA certified manufacturer with supporting documentation.

Note: Model number indicates cabinet length in inches. Ex. XS-192 = 192 inch cabinet length.

Average decibel rating at a distance of 10’ from the unit is 79 dB. Weight of XS models is 95 lb per linear foot.

Applications

  • Large Shipping / Receiving
  • Manufacturing
  • Transporation

Options

  • Galvanized Exterior Sheet Metal